Hot Products
0102030405
Capacitor Discharge Bolt Stud Welding Machine for Insulation Nails - China Suppliers and Factory for High Performance Solutions
Detailed Information
The stud welding machine is very time and cost saving, all stud welding constructions do not need drilling, punching, threading, riveting, threading and finishing steps. Welding torches continue to expand the application potential of structural design. In stud welding, the welding process is short in time, high in current and low in penetration.
Therefore, it can be welded to thinner sheets. Workpieces for stud welding must be welded from one side. Capable of welding in all positions, connected to restricted vertical bulkheads with the aid of extenders.
Main Features
- All welding machines use new electronic components.
- Adopt digital, soft switching inverter technology, small size, light weight, easy to move.
- The panel is simple and easy to adjust, and even new worker can weld it.
- Suitable for welding steel structures, building floor slabs, bridges, etc..
- Intuitive and clear digital display of welding current and welding time.
- Three-proof design for key parts, suitable for various harsh environments, stable and reliable operation.
Working Connection Diagram
Product Parameters
| Model | RSR-5K / RSR-10K |
| Rated Input Voltage | 500WH / 1000WH |
| Current | 47000UF*2 |
| Insulation Nails | 4500Pcs / 9000Pcs |
Installation Attentions
♦
Input voltage: AC three phase 380V 50/60Hz
♦
Input cable: ≥16mm²
♦
Output cable: 95mm², Welding gun ≦20m
♦
Power switch: 150A
♦
Ambient temperature: -10℃~+40℃
♦
Usage condition: No blocked on air inlet & outlet. No sunlight exposure. Pay attention to dust prevention.
Standard Accessories
1x Electrode Holder
1x Ground Clamp
1x Welding Mask
1x Brush/Hammer
Optional Accessories
Welding Helmet
Welding Gloves
Electrodes E6013
Lift TIG TORCH
Frequently Asked Questions
What are the main advantages of using this stud welding machine?
This stud welding machine is highly time and cost-saving. It eliminates the need for drilling, punching, threading, riveting, and finishing steps, significantly streamlining structural design and production.
Can this machine be used to weld thin metal sheets?
Yes, because the welding process features a short duration, high current, and low penetration, it is capable of welding onto thinner sheets without burning through.
What are the electrical requirements for installation?
The machine requires an input voltage of AC three-phase 380V at 50/60Hz, an input cable of ≥16mm², and a power switch capacity of 150A.
What standard accessories come included with the machine?
The standard package comes complete with 1x Electrode Holder, 1x Ground Clamp, 1x Welding Mask, and 1x Brush/Hammer.
What environmental conditions are required for safe operation?
It should be operated in temperatures ranging from -10℃ to +40℃. Ensure that the air inlets and outlets are not blocked, avoid direct sunlight exposure, and keep the unit protected from excessive dust.