Heavy Industrial 500A MIG Welding Machine - China Suppliers & Factory for 30mm Aluminum Plate with Water Cooling
The most common materials used in MIG welding are listed below:
Copper is a soft, malleable metal used in plumbing and electrical applications. MIG welding is the preferred process for welding copper. However, the heat required to weld copper is about twice that of steel where the heat temperature makes it easier and possible.
Aluminum is a soft, silvery, non-ferrous metal. Welding aluminum requires 100% pure argon gas. Aluminum welding can be difficult as the melt pool can quickly burn through the part and drip out the other side. For more information, see our guide on Aluminum Characteristics.
Steels are alloys made mainly of iron and carbon, usually also including sulfur and phosphorus. When welding steel, it is advised not to use 100% argon gas for shielding but rather 75% argon and 25% carbon dioxide. This is because 100% argon gas will reduce the ductility of the weld. To learn more, see our guide on the Properties of Steel.
Nickel alloys are composed of nickel and usually chromium, iron, molybdenum, and/or copper. Usually, 100% argon gas is used to weld nickel alloys. However, when more energy is required, up to 40% helium can be used. For more information, check out our guide on Nickel Alloy.
- All welding machines use new electronic components.
- Using IGBT soft switching inverter technology, beautiful welding performance.
- Small size, light weight, high efficiency and energy saving, high load endurance rate.
- Complete protection circuit and fault display function, safe and reliable.
- Closed-loop control, strong arc self-adjustment ability, stable welding process.
- Adopting a fully digital structure and high integration.
- Can weld aluminum and aluminum alloys, carbon steel, stainless steel, copper and other metals.
- Welding process storage and recall functions, software upgrade can support special processes.
- Integrated, beautiful and elegant appearance design, more convenient to operate.
| Model | NBM-500 |
| Rated Input Voltage | AC380V Three Phase 50Hz/60Hz |
| Rated Input Power | 27.5Kva |
| No Load Voltage | 80V |
| Rated Output | 500A/39V |
| Voltage Regulation | 14-50V |
| Rated Duty Cycle | 60% |
| Power Factor | 0.8 |
| Insulation Class | F |
| Shell Protection Grade | IP21S |
| Suggested Welding Wire | 1.0-1.6mm |
| Dimensions | 104*58*148cm |
| Weight | 105KG |
1x Electrode Holder
1x Ground Clamp
1x Welding Mask
1x Brush/Hammer
Welding Helmet
Welding Gloves
Electrodes E6013
Lift TIG TORCH