Hot Products
0102030405
IGBT Air Compressor with HF ARC Plasma Cutter - Premium Factory Suppliers in China for Stability & Heat Dissipation
Detailed Information
1. The advantages of the plasma cutting machine are that the plasma arc energy is more concentrated, the temperature is more localized, the cutting speed is faster, the deformation is smaller, and it can cut stainless steel, aluminum and other materials. Plasma cutting machine has the advantage of cutting thick plates, because the cutting speed is much higher than laser and flame.
2. The plasma arc can cut various metals, such as stainless steel, heat-resistant steel, titanium, molybdenum, tungsten, cast iron, copper, aluminum and aluminum alloy. Cutting stainless steel and aluminum thickness up to 200mm or more.
3. The plasma arc cutting speed is faster, and the production is relatively partial.
4. When cutting the plasma arc, you can get a relatively narrow radian, clean, tidy, no sticky residue, close to vertical incision, small incision deformation and thermal influence, small change in hardness, and good cutting quality.
Main Features
- All welding machines use new electronic components.
- Industrial-grade dual-module configuration, large current and strong cutting ability.
- High load endurance, suitable for longtime cutting operations.
- Non-contact high-frequency arc ignition, high arc ignition success rate and low interference.
- With manual welding function.
- Humanized and elegant appearance design, more convenient to operate.
- Three-proof design for key parts, suitable for various harsh environments, stable and reliable operation.
Working Connection Diagram
Product Parameters
| Model | LGK-70F | LGK-100F | LGK-130F | LGK-160F |
| Rated Input Voltage | AC220V/380V 50Hz/60Hz | AC 3P 380V 50Hz/60Hz | ||
| Rated Input Power | 10Kva | 12Kva | 17Kva | 24Kva |
| No Load Voltage | 330V | 340V | 340V | 340V |
| Current Regulation | 20-70A | 20-100A | 20-130A | 20-160A |
| Output Current | 70A | 100A | 130A | 160A |
| Load Duration | 60% | 60% | 60% | 60% |
| Cutting Thickness | 20mm | 30mm | 35mm | 40mm |
| Striking Mode | HF Non-contact | HF Non-contact | HF Non-contact | HF Non-contact |
| Insulation Class | F | F | F | F |
| Dimensions | 49*24*42cm | 60*36*55cm | 60*36*55cm | 64*39*63cm |
| Weight | 26.5Kg | 39Kg | 40Kg | 55Kg |
Installation Attentions
♦
Input voltage: AC Three Phase 380V, 50/60Hz
♦
Input cable: ≥6.0mm²
♦
Power switch: 63A
♦
Output cable: ≦25m
♦
Ambient temperature: -10℃~+40℃
♦
Usage condition: No blocked on air inlet & outlet, no sunlight exposure, pay attention to dust prevention.
Standard Accessories
1x Electrode Holder
1x Ground Clamp
1x Welding Mask
1x Brush/Hammer
Optional Accessories
Welding Helmet
Welding Gloves
Electrodes E6013
Lift TIG TORCH
Frequently Asked Questions (FAQ)
What materials can the plasma cutting machine cut?
The plasma arc can cut various metals including stainless steel, heat-resistant steel, titanium, molybdenum, tungsten, cast iron, copper, aluminum, and aluminum alloys. It can cut stainless steel and aluminum up to a thickness of 200mm or more.
What are the main advantages of plasma cutting over laser and flame cutting?
Plasma cutting features a more concentrated arc energy and localized temperature, resulting in faster cutting speeds, minimal deformation, and clean cuts with no sticky residue. It is especially advantageous and much faster for cutting thick metal plates.
What input power and cable are required for installation?
It requires a three-phase AC 380V input voltage (50/60Hz). The input cable should be ≥6.0mm², and the power switch should be rated at 63A. The output cable length should be ≦25m.
Does this machine offer features other than plasma cutting?
Yes, in addition to high-efficiency plasma cutting, all models in this series come with a built-in manual welding function for added versatility.
What is the cutting thickness range for different models?
The maximum cutting thickness varies by model: LGK-70F cuts up to 20mm, LGK-100F cuts up to 30mm, LGK-130F cuts up to 35mm, and LGK-160F cuts up to 40mm.
What conditions are required for operating the machine safely?
The machine should be operated in ambient temperatures between -10℃ and +40℃. Ensure that the air inlet and outlet are not blocked, avoid direct sunlight exposure, and take precautions to prevent dust accumulation.